Minor paint correction will usually take between 2-3 days. After and in depth clean and decomtamination of your vehicles paint work we perform a 2 stage machine polish, with most paint finishes this will remove up to and aim for 80% of defects, scratches and swirls with the cutting stage, we follow this up with a refining polish to remove the haze from the cutting process to give you an uniform finish to the highest of standards.
Minor Paint Correction
Preparation: Thoroughly wash and dry the vehicle. Use a clay bar to remove embedded contaminants, ensuring the paint is perfectly clean.
Inspection: Inspect the paint with, a paint depth gauge and also strong light source (e.g., LED) to identify the extent of defects.
Tape Off: Mask off plastic trim, rubber seals, and badges with painter's tape to prevent staining or damage from the polisher.
Test Spot: Perform a test spot on a small area to ensure the pad/polish combination removes defects without damaging the clear coat.
Machine Polishing: With a machine and medium-cut polish and pad, working in small (approx.) sections using overlapping passes.
Final Inspection: Wipe down with an IPA (Isopropyl Alcohol) spray to remove polishing oils and check for true results.
